PfSense

From Da Nerd Mage Wiki
Jump to navigation Jump to search

Download pfSense

Where to get it

"Aaarrrggg!"

See that nifty screencap over there on the right?

Look at it again.

It's important...
(You have to start picking options before it'll show you others...)

Stuff it onto a thumbdrive

(really should create command-line instructions for this part)

If working from a Linux Mint machine GUI, right-click & extract the .gz file. Then right-click the resulting .img file & select "Make bootable USB stick".

If working from one of those crappy Windows machines, use Rufus...

If you're playing with a Mac... Yer on yer own for now.

Configure the Hardware

You'll want either a dual NIC or 2 (or more...) NICs.

A hard drive (or SSD) could come in rather handy...

Coming soonTM... (PromiseTM...)

Installing as a VM...

Install pfSense

  • Boot your machine from the thumbdrive. (UEFI is just fine...)
  • Accept the copyright.
  • Select "Install"
  • Select "Continue with default keymap" (or, really, any keymap you like...)
  • Select "Auto (UFS)
  • Choose your disk for the install
    • I'd suggest only having one disk in the machine...
  • Select "Entire Disk
    • Yes... Proceed.
  • Select GPT (GUID Partition Table)
  • Hit "Finish"
  • Hit "Commit"
  • Watch the pretty progress screens... (Or ignore it until it's done... Your choice...)
  • When you see the "Manual Configuration" screen, Hit "No"
  • Hit "Reboot"
  • Go back & configure the machine to actually boot from the drive you installed pfSense onto...

Initial Configuration of pfSense

BREAKING NEWS...

Apparently, current release sets your networking up to default of WAN using DHCP on the first interface & LAN using 192.168.1.1/24 on the second by default.

If you have more than 2 interfaces, it seems to leave the rest un-configured. On first boot, pfSense will ask "Should VLANs be set up now [y|n]?"

Don't bother...

  • Select your WAN interface
    • bce0 on this test machine (T310)
  • Select your LAN interface
    • bce1 on this test machine (T310)
  • Verify they're selected properly & say yes.
  • Watch all the "done" messages scroll by (or not... again, your choice...)

After a moment or 3, you'll see the console menu. 


*** Welcome to pfSense 2.6.0-RELEASE (amd64) on pfSense ***
 WAN (wan)       -> bce0       -> v4/DHCP4: 192.168.0.26/24
 LAN (lan)       -> bce1       -> v4: 192.168.1.1/24

 0) Logout (SSH only)                  9) pfTop
 1) Assign Interfaces                 10) Filter Logs
 2) Set interface(s) IP address       11) Restart webConfigurator
 3) Reset webConfigurator password    12) PHP shell + pfSense tools
 4) Reset to factory defaults         13) Update from console
 5) Reboot system                     14) Enable Secure Shell (sshd)
 6) Halt system                       15) Restore recent configuration
 7) Ping Host                         16) Restart PHP-FPM
 8) Shell

Enter an option:

It's ALIVE!!!

Configuring pfSense from here...

At this point, you should be able to connect to the LAN port & point a web browser at 192.168.1.1

This is the Web-UI...

Default login is:

  • Username: admin
  • Password: pfsense

Change this. Do it NOW!

If you have the WAN port connected to the Internet, you should actually be capable of accessing the outside world right now.

Menu Structure

All the fancy stuff

(Coming soonTM... PromiseTM...)

Troubleshooting & Repair

Clearing the DNS Forwarder Cache

Source

To clear the DNS Forwarder cache, restart the dnsmasq daemon as follows:

Click Status / Services

Find dnsmasq in the list

Click Fa-repeat.png, or stop the service using Fa-stop-circle.png then start again with Fa-play-circle.png.

Restarting the daemon will clear the internal cache, but the client PCs may still have cached entries.

Flushing the ARP Cache

Click Diagnostics / Command Prompt

arp -d -a

Port Forwarding

Connecting to the VPN machine through the firewall

Notes & Tips

pfSense with WAN inside a LAN

WARNING:  This is a potential security hole!

If you want to operatea pfSense router entirely inside your local network (i.e.: building a network for installation elsewhere, but testing it locally...) and your local network uses an RFC 1918 address range, you need to allow that sort of addresses on the WAN interface. By default, they are blocked.

At the Web GUI dashboard:

  • Interfaces / WAN
    • Reserved Networks
      • Un-check "Block private networks and loopback addresses"

Reverse this if/when your router goes live on the Internet!

If you want to be able to ping your network from the outside, Go into Firewall / Rules / WAN & create a rule to allow ICMP.

PfSense-ICMP-rule.png

To adjust the size of your subnet on the internal LAN connections:

Here's a handy Subnet Cheat Sheet

To allow management access from OUTSIDE your network

WARNING:  This is a potential security hole!

Via SSH

  • Turn on SSHD
  • Create a firewall rule allowing SSH from outside
    • In the Web UI:
    • Firewall > Rules, WAN Tab
    • Action: pass
    • Interface: WAN
    • Protocol: TCP
    • Source: The IP address or subnet of the client, an alias containing management hosts/networks, or (as a last resort only) Any
    • Destination: WAN Address
    • Destination port range: 22 (Or the custom port)
    • Description: Allow remote management from anywhere (Dangerous!)

Via Web UI

  • Create a firewall rule allowing SSH from outside
    • In the Web UI:
    • Firewall > Rules, WAN Tab
    • Action: pass
    • Interface: WAN
    • Protocol: TCP
    • Source: The IP address or subnet of the client, an alias containing management hosts/networks, or (as a last resort only) Any
    • Destination: WAN Address
    • Destination port range:HTTPS (Or the custom port)
    • Description: Allow remote management from anywhere (Dangerous!)

Note: If you are messing about with an internal pfSense server, you'll get DNS Rebinding Attack errors. Fix this by going into System / Advanced / Admin Access & setting an appropriate Alternate Hostnames entry under webConfigurator.

Advanced Topics

Some Links

Retrieved from ‘https://wiki.nerdmage.ca/index.php?title=PfSense&oldid=1851’