Difference between revisions of "ESXi - 6.7 iscsi"

From Da Nerd Mage Wiki
Jump to navigation Jump to search
Line 67: Line 67:
* '''add'''
* '''add'''
: Add a sendtarget address
: Add a sendtarget address
:* <code>esxcli iscsi adapter discovery sendtarget add</code>
:* <code>esxcli iscsi adapter discovery sendtarget add '''CMD_OPTIONS'''</code>
 
* '''remove'''
* '''remove'''
: Remove a sendtarget address
: Remove a sendtarget address
:* <code>esxcli iscsi adapter discovery sendtarget remove</code>
:* <code>esxcli iscsi adapter discovery sendtarget remove '''CMD_OPTIONS'''</code>
 
'''CMD_OPTIONS'''
  -A|--adapter=<str>    The iSCSI adapter name. (required)
  -a|--address=<str>    The iSCSI sendtarget address: <ip/dns[:port]>. IPv6 address can be
                        specified as [XX:XX:XX:XX::XX]:port or XX:XX:XX:XX::XX (required)


===== auth =====
===== auth =====
Line 76: Line 82:
* '''get'''
* '''get'''
: Get iSCSI CHAP authentication on a sendtarget address
: Get iSCSI CHAP authentication on a sendtarget address
:* <code>esxcli iscsi adapter discovery sendtarget auth chap get</code>
:* <code>esxcli iscsi adapter discovery sendtarget auth chap get '''CMD_OPTIONS'''</code>
'''CMD_OPTIONS'''
  -A|--adapter=<str>    The iSCSI adapter name. (required)
  -a|--address=<str>    The iSCSI sendtarget address: <ip/dns[:port]> (required)
  -d|--direction=<str>  The iSCSI authentication direction. Options are: [uni, mutual]
 
* '''set'''
* '''set'''
: Set iSCSI CHAP authentication on a sendtarget address
: Set iSCSI CHAP authentication on a sendtarget address
:* <code>esxcli iscsi adapter discovery sendtarget auth chap set</code>
:* <code>esxcli iscsi adapter discovery sendtarget auth chap set '''CMD_OPTIONS'''</code>
'''CMD_OPTIONS'''
  -A|--adapter=<str>    The iSCSI adapter name. (required)
  -a|--address=<str>    The iSCSI sendtarget address: <ip/dns[:port]> (required)
  -N|--authname=<str>  The iSCSI authentication name
  -D|--default          Resetting iSCSI authentication setting to default.
  -d|--direction=<str>  The iSCSI authentication direction. Options are: [uni, mutual]
  -I|--inherit          Inheriting iSCSI authentication setting from parent.
  -l|--level=<str>      The iSCSI authentication level. Options are: [prohibited, discouraged,
                        preferred, required]
  -S|--secret=<str>    The iSCSI authentication secret. The recommended length is at least 12
                        bytes. (secret)
                        WARNING: Providing secret values on the command line is insecure because it
                        may be logged or preserved in history files. Instead, specify this option
                        with no value on the command line, and enter the value on the supplied
                        prompt.


===== param =====
===== param =====
* '''get'''
* '''get'''
: Get iSCSI parameter on a sendtarget address
: Get iSCSI parameter on a sendtarget address
:* <code>esxcli iscsi adapter discovery sendtarget param get</code>
:* <code>esxcli iscsi adapter discovery sendtarget param get '''CMD_OPTIONS'''</code>
'''CMD_OPTIONS'''
  -A|--adapter=<str>    The iSCSI adapter name. (required)
  -a|--address=<str>    The iSCSI sendtarget address: <ip/dns[:port]> (required)
 
* '''set'''
* '''set'''
: Set the iSCSI parameter for the iSCSI Sendtarget.
: Set the iSCSI parameter for the iSCSI Sendtarget.
:* <code>esxcli iscsi adapter discovery sendtarget param set</code>
:* <code>esxcli iscsi adapter discovery sendtarget param set '''CMD_OPTIONS'''</code>
'''CMD_OPTIONS'''
  -A|--adapter=<str>    The iSCSI adapter name. (required)
  -a|--address=<str>    The iSCSI sendtarget address: <ip/dns[:port]> (required)
  -D|--default          Resetting iSCSI parameter setting to default.
  -I|--inherit          Inheriting iSCSI parameter setting from parent.
  -k|--key=<str>        The iSCSI parameter key (required)
  -v|--value=<str>      The iSCSI parameter value


==== statictarget ====
==== statictarget ====

Revision as of 13:51, 9 February 2022

iscsi

VMware Internet Small Computer Systems Interface (iSCSI) commands.

adapter

  • list
List all the iSCSI Host Bus Adapters on the system.
  • esxcli iscsi adapter list
get
List the iSCSI information for the iSCSI Host Bus Adapter.
  • esxcli iscsi adapter get NAME
set
Set the iSCSI name and alias for the iSCSI Host Bus Adapter.
  • esxcli iscsi adapter set CMD_OPTIONS
NAME
 -A|--adapter=<str>    The iSCSI adapter name. (required)
CMD_OPTIONS
 -A|--adapter=<str>            The iSCSI adapter name. (required)
 -a|--alias=<str>              The iSCSI initiator alias.
 -n|--name=<str>               The iSCSI initiator name.
 -s|--skip-if-session-active   Do not change initiator name if a session is active on the adapter.

auth

chap

  • get
Get the iSCSI CHAP authentication for the iSCSI Host Bus Adapter.
  • esxcli iscsi adapter auth chap get CMD_OPTIONS
CMD_OPTIONS
 -A|--adapter=<str>    The iSCSI adapter name. (required)
 -d|--direction=<str>  The iSCSI CHAP authentication direction. Options are: [uni, mutual]
  • set
Set the iSCSI CHAP authentication for the iSCSI Host Bus Adapter.
  • esxcli iscsi adapter auth chap set CMD_OPTIONS
CMD_OPTIONS
 -A|--adapter=<str>    The iSCSI adapter name. (required)
 -N|--authname=<str>   The iSCSI CHAP authentication name
 -D|--default          Resetting iSCSI CHAP authenthication setting to default.
 -d|--direction=<str>  The iSCSI CHAP authentication direction. Options are: [uni, mutual]
 -l|--level=<str>      The iSCSI CHAP authentication level. Options are: [prohibited, discouraged,
                       preferred, required]
 -S|--secret=<str>     The iSCSI CHAP authentication secret. The recommended length is at least 12
                       bytes. (secret)
                       WARNING: Providing secret values on the command line is insecure because it
                       may be logged or preserved in history files. Instead, specify this option
                       with no value on the command line, and enter the value on the supplied
                       prompt.

capabilities

  • get
List the iSCSI details for the iSCSI Host Bus Adapter.
  • esxcli iscsi adapter capabilities get NAME
NAME
 -A|--adapter=<str>    The iSCSI adapter name. (required)

discovery

  • rediscover
Do the iSCSI Discovery for the iSCSI Host Bus Adapter.
  • esxcli iscsi adapter discovery rediscover NAME
NAME
 -A|--adapter=<str>    The iSCSI adapter name. (required)

sendtarget

  • list
List sendtarget addresses
  • esxcli iscsi adapter discovery sendtarget list
  • add
Add a sendtarget address
  • esxcli iscsi adapter discovery sendtarget add CMD_OPTIONS
  • remove
Remove a sendtarget address
  • esxcli iscsi adapter discovery sendtarget remove CMD_OPTIONS
CMD_OPTIONS
 -A|--adapter=<str>    The iSCSI adapter name. (required)
 -a|--address=<str>    The iSCSI sendtarget address: <ip/dns[:port]>. IPv6 address can be
                       specified as [XX:XX:XX:XX::XX]:port or XX:XX:XX:XX::XX (required)
auth
chap
  • get
Get iSCSI CHAP authentication on a sendtarget address
  • esxcli iscsi adapter discovery sendtarget auth chap get CMD_OPTIONS
CMD_OPTIONS
 -A|--adapter=<str>    The iSCSI adapter name. (required)
 -a|--address=<str>    The iSCSI sendtarget address: <ip/dns[:port]> (required)
 -d|--direction=<str>  The iSCSI authentication direction. Options are: [uni, mutual]
  • set
Set iSCSI CHAP authentication on a sendtarget address
  • esxcli iscsi adapter discovery sendtarget auth chap set CMD_OPTIONS
CMD_OPTIONS
 -A|--adapter=<str>    The iSCSI adapter name. (required)
 -a|--address=<str>    The iSCSI sendtarget address: <ip/dns[:port]> (required)
 -N|--authname=<str>   The iSCSI authentication name
 -D|--default          Resetting iSCSI authentication setting to default.
 -d|--direction=<str>  The iSCSI authentication direction. Options are: [uni, mutual]
 -I|--inherit          Inheriting iSCSI authentication setting from parent.
 -l|--level=<str>      The iSCSI authentication level. Options are: [prohibited, discouraged,
                       preferred, required]
 -S|--secret=<str>     The iSCSI authentication secret. The recommended length is at least 12
                       bytes. (secret)
                       WARNING: Providing secret values on the command line is insecure because it
                       may be logged or preserved in history files. Instead, specify this option
                       with no value on the command line, and enter the value on the supplied
                       prompt.
param
  • get
Get iSCSI parameter on a sendtarget address
  • esxcli iscsi adapter discovery sendtarget param get CMD_OPTIONS
CMD_OPTIONS
 -A|--adapter=<str>    The iSCSI adapter name. (required)
 -a|--address=<str>    The iSCSI sendtarget address: <ip/dns[:port]> (required)
  • set
Set the iSCSI parameter for the iSCSI Sendtarget.
  • esxcli iscsi adapter discovery sendtarget param set CMD_OPTIONS
CMD_OPTIONS
 -A|--adapter=<str>    The iSCSI adapter name. (required)
 -a|--address=<str>    The iSCSI sendtarget address: <ip/dns[:port]> (required)
 -D|--default          Resetting iSCSI parameter setting to default.
 -I|--inherit          Inheriting iSCSI parameter setting from parent.
 -k|--key=<str>        The iSCSI parameter key (required)
 -v|--value=<str>      The iSCSI parameter value

statictarget

  • list
List static target addresses
  • esxcli iscsi adapter discovery statictarget list
  • add
Add a static target address
  • esxcli iscsi adapter discovery statictarget add
  • remove
Remove a static target
  • esxcli iscsi adapter discovery statictarget remove

status

  • get
Get the iSCSI adapter discovery status for the iSCSI Host Bus Adapter.
  • esxcli iscsi adapter discovery status get

ibftboot

logicalnetworkportal

networkportal

physicalnetworkportal

plugin

session

software

Retrieved from ‘https://wiki.nerdmage.ca/index.php?title=ESXi_-_6.7_iscsi&oldid=833’