Difference between revisions of "UPS Handling with NUT"
Jump to navigation
Jump to search
| Line 37: | Line 37: | ||
* <code>ip a</code> | * <code>ip a</code> | ||
* <code>sudo vi /etc/nut/upsd.conf</code> | * <code>sudo vi /etc/nut/upsd.conf</code> | ||
LISTEN 192.168.2.219 | |||
LISTEN 127.0.0.1 3493 | |||
LISTEN ::1 3493 | |||
* <code>sudo vi /etc/nut/upsd.users</code> | * <code>sudo vi /etc/nut/upsd.users</code> | ||
Revision as of 20:04, 3 February 2022
 |
11 (bullseye) |
| As always... | |
|---|---|
|
Start with: |
|
Install NUT
sudo apt install nut
Configure NUT
sudo vi /etc/nut/nut.conf
MODE=netserver
sudo vi /etc/nut/ups.conf
[cyberpower]
driver = usbhid-ups
port = auto
sudo upsdrvctl startip asudo vi /etc/nut/upsd.conf
LISTEN 192.168.2.219 LISTEN 127.0.0.1 3493 LISTEN ::1 3493
sudo vi /etc/nut/upsd.userssudo vi /etc/nut/upsmon.conf
Manage NUT
sudo service nut-server restartsudo service nut-server status
upsc cyberpowerupscmd -l cyberpower