Difference between revisions of "UPS Handling with NUT"
Jump to navigation
Jump to search
| Line 26: | Line 26: | ||
* <code>sudo vi /etc/nut/nut.conf</code> | * <code>sudo vi /etc/nut/nut.conf</code> | ||
* <code>sudo vi /etc/nut/ups.conf</code> | * <code>sudo vi /etc/nut/ups.conf</code> | ||
* <code>sudo upsdrvctl start</code> | * <code>sudo upsdrvctl start</code> | ||
Revision as of 19:00, 3 February 2022
 |
11 (bullseye) |
| As always... | |
|---|---|
|
Start with: |
|
Install NUT
sudo apt install nut
Configure NUT
sudo vi /etc/nut/nut.conf
sudo vi /etc/nut/ups.confsudo upsdrvctl startip asudo vi /etc/nut/upsd.conf
sudo vi /etc/nut/upsd.userssudo vi /etc/nut/upsmon.conf
Manage NUT
sudo service nut-server restartsudo service nut-server status
upsc cyberpowerupscmd -l cyberpower