Difference between revisions of "UPS Handling with NUT"
Jump to navigation
Jump to search
| Line 30: | Line 30: | ||
* <code>sudo vi /etc/nut/nut.conf</code> | * <code>sudo vi /etc/nut/nut.conf</code> | ||
MODE=netserver | MODE=netserver | ||
(In my case, I've installed NUT on a VM and it'll be managing the UPS for the whole server...) | (In my case, I've installed NUT on a VM and it'll be managing the UPS for the whole server...) | ||
| Line 36: | Line 35: | ||
{{!}}+ MODE options: | {{!}}+ MODE options: | ||
{{!}}- | {{!}}- | ||
{{!}} style="width: 90.175px;" {{!}} none | {{!}} style="width: 90.175px;" {{!}} '''none''' | ||
{{!}} style="width: 619.15px;" {{!}} | {{!}} style="width: 619.15px;" {{!}} | ||
Disable automatic startup of NUT | Disable automatic startup of NUT | ||
{{!}}- | {{!}}- | ||
{{!}} style="width: 90.175px;" {{!}} standalone | {{!}} style="width: 90.175px;" {{!}} '''standalone''' | ||
{{!}} style="width: 619.15px;" {{!}} This MODE is for local only configuration | {{!}} style="width: 619.15px;" {{!}} This MODE is for local only configuration | ||
{{!}}- | {{!}}- | ||
{{!}} style="width: 90.175px;" {{!}} netserver | {{!}} style="width: 90.175px;" {{!}} '''netserver''' | ||
{{!}} style="width: 619.15px;" {{!}} This MODE is open to the network. (A NUT server) | {{!}} style="width: 619.15px;" {{!}} This MODE is open to the network. (A NUT server) | ||
{{!}}- | {{!}}- | ||
{{!}} style="width: 90.175px;" {{!}} netclient | {{!}} style="width: 90.175px;" {{!}} '''netclient''' | ||
{{!}} style="width: 619.15px;" {{!}} This MODE is for client machines that will access a NUT server | {{!}} style="width: 619.15px;" {{!}} This MODE is for client machines that will access a NUT server | ||
{{!}}} | {{!}}} | ||
Revision as of 20:27, 3 February 2022
 |
11 (bullseye) |
|
| As always... | |
|---|---|
|
Start with: |
|
Install NUT
sudo apt install nut
Configure NUT
Select your mode
sudo vi /etc/nut/nut.conf
MODE=netserver
(In my case, I've installed NUT on a VM and it'll be managing the UPS for the whole server...)
| none |
Disable automatic startup of NUT |
| standalone | This MODE is for local only configuration |
| netserver | This MODE is open to the network. (A NUT server) |
| netclient | This MODE is for client machines that will access a NUT server |
Select your hardware
sudo vi /etc/nut/ups.conf
[cyberpower]
driver = usbhid-ups
port = auto
Start & test
sudo upsdrvctl startip a
Set up communications
sudo vi /etc/nut/upsd.conf
LISTEN 192.168.2.219 LISTEN 127.0.0.1 3493 LISTEN ::1 3493
Set up access
sudo vi /etc/nut/upsd.users
[upsmon]
password = supersecretpassword
upsmon master
sudo vi /etc/nut/upsmon.conf
MONITOR myups@192.168.2.219 1 monuser supersecretpassword master
Manage NUT
sudo service nut-server restartsudo service nut-server statusupsc cyberpowerupscmd -l cyberpower