Difference between revisions of "UPS Handling with NUT"

From Da Nerd Mage Wiki
Jump to navigation Jump to search
(Undo revision 1108 by Tinker (talk))
Tag: Undo
 
(11 intermediate revisions by the same user not shown)
Line 21: Line 21:
[https://networkupstools.org/index.html Network UPS Tools]
[https://networkupstools.org/index.html Network UPS Tools]


= Install NUT =
= Install & Configure NUT =
 
* <code>sudo apt install nut</code>
 
= Configure NUT =


== Select your mode ==
== Select your mode ==
Line 33: Line 29:
{{!}}-  
{{!}}-  
{{!}} style="width: 90.175px;" {{!}} '''none'''
{{!}} style="width: 90.175px;" {{!}} '''none'''
{{!}} style="width: 619.15px;" {{!}}
{{!}} style="width: 400.15px;" {{!}} Disable automatic startup of NUT
Disable automatic startup of NUT
{{!}}
{{!}}-  
{{!}}-  
{{!}} style="width: 90.175px;" {{!}} '''standalone'''
{{!}} style="width: 90.175px;" {{!}} '''standalone'''
{{!}} style="width: 619.15px;" {{!}} This MODE is for local only configuration
{{!}} style="width: 400.15px;" {{!}} This MODE is for local only configuration
{{!}} [[Standalone NUT usage]]
{{!}}-  
{{!}}-  
{{!}} style="width: 90.175px;" {{!}} '''netserver'''
{{!}} style="width: 90.175px;" {{!}} '''netserver'''
{{!}} style="width: 619.15px;" {{!}} This MODE is open to the network. (A NUT server)
{{!}} style="width: 400.15px;" {{!}} This MODE is open to the network. (A NUT server)
{{!}} [[Setting up a NUT Server]]
{{!}}-  
{{!}}-  
{{!}} style="width: 90.175px;" {{!}} '''netclient'''
{{!}} style="width: 90.175px;" {{!}} '''netclient'''
{{!}} style="width: 619.15px;" {{!}} This MODE is for client machines that will access a NUT server
{{!}} style="width: 400.15px;" {{!}} This MODE is for client machines that will access a NUT server
{{!}}}<p class="mwt-heading">See [https://networkupstools.org/docs/man/nut.conf.html the nut.conf documentation] for more details.</p>
{{!}} [[Setting up a NUT Client]]
{{!}}}
<p class="mwt-heading">See [https://networkupstools.org/docs/man/nut.conf.html the nut.conf documentation] for more details.</p>


* [[Setting up a NUT Server]]
* [[Using NUT with pfSense]]
* [[Setting up a NUT Client]]
* [[Using NUT to gracefully shut down ESXi]]
* [[Using NUT to gracefully shut down ESXi]]
== Select your hardware ==
* <code>sudo vi /etc/nut/ups.conf</code>
[cyberpower]
        driver = usbhid-ups
        port = auto
        desc = "A random surplus UPS"
(In my case, I'm setting up a [https://www.cyberpowersystems.com/product/ups/intelligent-lcd/cp1000avrlcd/ CyberPower 1000AVR] & connecting it by passing USB through to the VM...)
If your UPS isn't handled natively by the '''usbhid-ups''' driver, or you need to set options, start with [https://networkupstools.org/docs/man/ups.conf.html the ups.conf documentation] for more details.
== Start & test ==
* <code>sudo upsdrvctl start</code>
You should see:
Network UPS Tools - UPS driver controller 2.7.4
Network UPS Tools - Generic HID driver 0.41 (2.7.4)
USB communication driver 0.33
Possibly followed by a bit of information about your UPS
== Set up communications ==
(needed if you've set up as '''MODE = netserver'''...)
You can determine your servers IP address using:
* <code>ip a</code>
* <code>sudo vi /etc/nut/upsd.conf</code>
LISTEN '''192.168.0.7'''
LISTEN 127.0.0.1 3493
LISTEN ::1 3493
Where '''192.168.0.7'''&nbsp;should be replaced with the actual IP of the machine.
See [https://networkupstools.org/docs/man/upsd.conf.html the upsd.conf documentation] for more details.
== Set up access ==
* <code>sudo vi /etc/nut/upsd.users</code>
[upsmon]
    password = supersecretpassword
    upsmon master
See [https://networkupstools.org/docs/man/upsd.users.html the upsd.users documentation] for more details.
* <code>sudo vi /etc/nut/upsmon.conf</code>
MONITOR cyberpower@192.168.2.219 1 monuser supersecretpassword master
See [https://networkupstools.org/docs/man/upsmon.conf.html the upsmon.conf documentation] for more details.


= Managing NUT =
= Managing NUT =
Line 110: Line 60:
** [https://networkupstools.org/docs/man/upsrw.html man page]
** [https://networkupstools.org/docs/man/upsrw.html man page]
* <code>nut-scanner</code>
* <code>nut-scanner</code>
** [https://networkupstools.org/docs/man/upsrw.html man page]
** [https://networkupstools.org/docs/man/nut-scanner.html man page]


= further Usage Concepts =
= further Usage Concepts =

Latest revision as of 10:38, 15 May 2022

Proven on:
Logo Debian.png
 11 (bullseye)


As always...

Start with:

  • sudo apt update
  • sudo apt upgrade

Network UPS Tools

Install & Configure NUT

Select your mode

MODE options:
none Disable automatic startup of NUT
standalone This MODE is for local only configuration Standalone NUT usage
netserver This MODE is open to the network. (A NUT server) Setting up a NUT Server
netclient This MODE is for client machines that will access a NUT server Setting up a NUT Client

See the nut.conf documentation for more details.

Managing NUT

The usual:

  • sudo service nut-server [start|stop|restart|status]

Client commands:

further Usage Concepts

NUT gives lots of options.

Things like:

  • Cleanly shutting down all of the VMs on a server & the server itself too.
  • Sending notifications about power issues.
  • Managing redundant UPSs on your system.
  • etc...
Retrieved from ‘https://wiki.nerdmage.ca/index.php?title=UPS_Handling_with_NUT&oldid=1109’