Setting up a NUT Client

From Da Nerd Mage Wiki
Revision as of 22:22, 11 November 2023 by Tinker (talk | contribs) (→‎Select your REMOTE hardware)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Install NUT client

  • sudo apt install nut-client

Select your mode

  • sudo vi /etc/nut/nut.conf

(I'm installing NUT on VMs and accessing the NUT server in it's own VM on the same ESXi server...) 

MODE=netclient

Case #1: Non-GUI systems

(Running Debian 11...)

Select your REMOTE hardware

  • sudo vi /etc/nut/upsmon.conf
MONITOR cyberpower@ups.server.tld 1 username password client

(where ups.server.tld is the name or IP of your NUT server.)

Retrieved from ‘https://wiki.nerdmage.ca/index.php?title=Setting_up_a_NUT_Client&oldid=1876’