ESXi - 6.7 network

network

Operations that pertain to the maintenance of networking on an ESX host. This includes a wide variety of commands to manipulate virtual networking components (vswitch, portgroup, etc) as well as local host IP, DNS and general host networking settings.

diag

• ping

Send ICMP echo requests to network hosts.

• esxcli network diag ping CMD_OPTIONS

CMD_OPTIONS
 -c|--count=<long>     Specify the number of packets to send.
 -D|--debug            VMKPing debug mode.
 -d|--df               Set DF bit on IPv4 packets.
 -H|--host=<str>       Specify the host to send packets to. This parameter is required when not
                       executing ping in debug mode (-D)
 -I|--interface=<str>  Specify the outgoing interface.
 -i|--interval=<str>   Set the interval for sending packets in seconds.
 --ipv4                Ping with ICMPv4 echo requests.
 --ipv6                Ping with ICMPv6 echo requests.
 --netstack=<str>      Specify the TCP/IP netstack which the interface resides on
 -N|--nexthop=<str>    Override the system's default route selection, in dotted quad notation.
                       (IPv4 only. Requires interface option)
 -s|--size=<long>      Set the payload size of the packets to send.
 -t|--ttl=<long>       Set IPv4 Time To Live or IPv6 Hop Limit
 -W|--wait=<str>       Set the timeout to wait if no responses are received in seconds.

ens

lcore

• list

List ENS contexts.

• esxcli network ens lcore list

• add

Create ENS context.

• esxcli network ens lcore add ID

ID
 -l|--lcore-id=<long>  ENS context id to be created. (required)

• remove

Destroy ENS context.

• esxcli network ens lcore remove ID

ID
 -l|--lcore-id=<long>  ENS context id to be destroyed. (required)

affinity

• get

Get the affinity for given ENS context.

• esxcli network ens lcore affinity get ID

ID
 -l|--lcore-id=<long>  ENS context id. (required)

• set

Set affinity for given ENS context.

• esxcli network ens lcore affinity set ID NODE

ID
 -l|--lcore-id=<long>  ENS context id. (required)
NODE
 -a|--affinity=<long>  Numa node affinity. (required)

switch

• get

Get the switch associated with given ENS context.

• esxcli network ens lcore switch get ID

ID
 -l|--lcore-id=<long>  ENS context id. (required)

• add

Associate given ENS context with given switch.

• esxcli network ens lcore switch add ID SWITCH

ID
 -l|--lcore-id=<long>  ENS context id. (required)
SWITCH
 -s|--switch=<str>     Switch name. (required)

• remove

Disassociate given ENS context from virtual switch.

• esxcli network ens lcore switch remove ID

ID
 -l|--lcore-id=<long>  ENS context id. (required)

maxLcores

• get

Get the maximum number of ENS contexts (lcores).

• esxcli network ens maxLcores get

• set

Set the maximum number of ENS contexts.

• esxcli network ens maxLcores set MAXCORES

MAXCORES
 -n|--maxlcores=<long> Number of maximum ENS contexts to be assigned. (required)

firewall

• get

Get the firewall status.

• esxcli network firewall get

• set

Set firewall enabled status and default action.

• esxcli network firewall set PARAM

PARAM
    --enabled or --default-action

• refresh

Load ruleset configuration for firewall.

• esxcli network firewall refresh

• load

Load firewall module and rulesets configuration.

• esxcli network firewall load

• unload

Allow unload firewall module.

• esxcli network firewall unload

ruleset

• list

List the rulesets in firewall.

• esxcli network firewall ruleset list

• set

Set firewall ruleset status (allowedAll flag and enabled status).

• esxcli network firewall ruleset set CMD_OPTIONS

CMD_OPTIONS
 -a|--allowed-all=<bool>   Set to true to allowed all ip, set to false to use allowed ip list.
 -e|--enabled=<bool>       Set to true to enable ruleset, set to false to disable it.
 -r|--ruleset-id=<str>     The label of the ruleset. (required)

allowedip

• list

list allowed ip addresses for rulesets.

• esxcli network firewall ruleset allowedip list

• add

Add allowed ip address/range to the ruleset ruleset.

• esxcli network firewall ruleset allowedip add LABEL RANGE

• remove

Remove allowed ip address/range from the ruleset.

• esxcli network firewall ruleset allowedip remove LABEL RANGE

LABEL
 -r|--ruleset-id=<str> The label of the ruleset. (required)
RANGE
-i|--ip-address=<str> Allowed ip address/range for the ruleset. (required)

client

• get

Show the number of clients using a firewall ruleset.

• esxcli network firewall ruleset client get

• add

Add a new client to a firewall ruleset. This enables the firewall ruleset and increments the number of clients using the ruleset.

• esxcli network firewall ruleset client add

• remove

Remove a client from a firewall ruleset. This decrements the number of clients using the ruleset and if the number reaches zero the ruleset is disabled.

• esxcli network firewall ruleset client remove

rule

• list

List the rules of each ruleset in firewall.

• esxcli network firewall ruleset rule list