Setup a VPN

Proven on:

11 (bullseye)

As always...
Start with:	sudo apt update sudo apt upgrade

Install openvpn

• sudo apt install openvpn

Testing

We'll build a raw (unsecured) connection for testing.

Note that this is not a persistent setup. Hitting Ctrl-C in the terminal where you started openvpn will destroy the VPN tunnel.

Configure as a server

• sudo openvpn --dev tun1 --ifconfig 10.9.8.1 10.9.8.2

in a second terminal:

• ip a

& you should see a tun1 entry like:

9: tun1: <pointopoint,multicast,noarp,up,lower_up> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 500
   link/none 
   inet 10.9.8.1 peer 10.9.8.2/32 scope global tun1
      valid_lft forever preferred_lft forever
   inet6 fe80::dc71:3707:693c:5017/64 scope link stable-privacy 
      valid_lft forever preferred_lft forever

Configure as a client

• sudo openvpn --remote SERVER_IP --dev tun1 --ifconfig 10.9.8.2 10.9.8.1

(Where SERVER_IP is the IP address or name of the machine acting as the server...)

in a second terminal:

• ip a

& you should see a tun1 entry like:

3: tun1: <pointopoint,multicast,noarp,up,lower_up> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 500
   link/none 
   inet 10.9.8.2 peer 10.9.8.1/32 scope global tun1
      valid_lft forever preferred_lft forever
   inet6 fe80::4c39:d598:21b8:2b41/64 scope link stable-privacy 
      valid_lft forever preferred_lft forever</pointopoint,multicast,noarp,up,lower_up>

Securing your VPN

Handling it locally

Static-Key

In the server's /etc/openvpn directory, run the following command to generate a static key:

• sudo openvpn --genkey --secret static.key

Copy this static key to the clients /etc/openvpn directory using a secure channel like scp or sftp.

• sudo scp static.key USER@VPNclient:~
  • Then, on the client:
• sudo mv static.key ~/static.key /etc/openvpn

On the server, create a new /etc/openvpn/tun0.conf file:

• sudo vi /etc/openvpn/tun0.conf

and add the following:

dev tun0
ifconfig 10.9.8.1 10.9.8.2
secret /etc/openvpn/static.key

On the client, create a new /etc/openvpn/tun0.conf file:

• sudo vi /etc/openvpn/tun0.conf

and add the following:

remote SERVER_IP
dev tun0
ifconfig 10.9.8.2 10.9.8.1
secret /etc/openvpn/static.key

Start OpenVPN by hand on both sides with the following command (verbose output at 6):

• sudo openvpn --config /etc/openvpn/tun0.conf --verb 6

You should now see tun devices on both machines (like in the Testing section above):

• ip a

TLS-enabled

WERKIN ON IT

Using easy-rsa

Using a Commercial VPN Service

PIA

WERKIN ON IT

NordVPN

WERKIN ON IT

Starting the VPN on Boot

Server

• sudo vi /etc/openvpn/server/server.conf

WERKIN ON IT

& create the status log file:

• touch /var/log/openvpn/openvpn-status.log

Restart OpenVPN:

• systemctl daemon-reload
• sudo service openvpn restart

Client

• sudo vi /etc/openvpn/client/client.conf

WERKIN ON IT

Restart OpenVPN:

• systemctl daemon-reload
• sudo service openvpn restart