Building a VPN tunnel from scratch

Proven on:

13 (trixie)

As always...
Start with:	sudo apt update sudo apt upgrade

Install openvpn

• sudo apt install openvpn

NOTE: If you are working on an LXC, see this.

On-demand tunnel

In the following 2 sections:

• 10.9.8.1 & 10.9.8.2 are arbitrary private IPs
• SERVER_IP is the NORMAL IP address or name of the machine acting as the server

These commands can be run in the background to create the tunnel when needed.

On-demand server

• sudo openvpn --dev tun1 --ifconfig 10.9.8.1 10.9.8.2

in a second terminal:

• ip a

& you should see a tun1 entry like:

9: tun1: <pointopoint,multicast,noarp,up,lower_up> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 500
   link/none 
   inet 10.9.8.1 peer 10.9.8.2/32 scope global tun1
      valid_lft forever preferred_lft forever
   inet6 fe80::dc71:3707:693c:5017/64 scope link stable-privacy 
      valid_lft forever preferred_lft forever

On-demand client

• sudo openvpn --remote SERVER_IP --dev tun1 --ifconfig 10.9.8.2 10.9.8.1

in a second terminal:

• ip a

& you should see a tun1 entry like:

3: tun1: <pointopoint,multicast,noarp,up,lower_up> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 500
   link/none 
   inet 10.9.8.2 peer 10.9.8.1/32 scope global tun1
      valid_lft forever preferred_lft forever
   inet6 fe80::4c39:d598:21b8:2b41/64 scope link stable-privacy 
      valid_lft forever preferred_lft forever</pointopoint,multicast,noarp,up,lower_up>

Persistant (on-boot) tunnel

WERKIN ON IT