Difference between revisions of "Setting up a NUT Client"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
= Install NUT client= | |||
* <code>sudo apt install nut-client</code> | |||
== Select your mode == | == Select your mode == | ||
* <code>sudo vi /etc/nut/nut.conf</code> | * <code>sudo vi /etc/nut/nut.conf</code> | ||
Revision as of 22:32, 9 April 2022
Install NUT client
sudo apt install nut-client
Select your mode
sudo vi /etc/nut/nut.conf
(I'm installing NUT on VMs and accessing the NUT server in it's own VM on the same ESXi server...)
MODE=netclient
Case #1: Non-GUI systems
(Running Debian 11...)
Select your REMOTE hardware
sudo vi /etc/nut/upsmon.conf
MONITOR cyberpower@ups.server.tld 1 username password slave
(where ups.server.tld is the name or IP of your NUT server.)