Difference between revisions of "Setting up a NUT Client"
Jump to navigation
Jump to search
| Line 7: | Line 7: | ||
(Running Debian 11...) | (Running Debian 11...) | ||
=== Select your REMOTE hardware === | === Select your REMOTE hardware === | ||
* <code>sudo vi /etc/nut/upsmon.conf</code> | * <code>sudo vi /etc/nut/upsmon.conf</code> | ||
MONITOR cyberpower@ups.server.tld 1 username password slave | |||
== == | == == | ||
Revision as of 21:51, 9 April 2022
Select your mode
sudo vi /etc/nut/nut.conf
(I'm installing NUT on VMs and accessing the NUT server in it's own VM on the same ESXi server...)
MODE=netclient
Case #1: Non-GUI systems
(Running Debian 11...)
Select your REMOTE hardware
sudo vi /etc/nut/upsmon.conf
MONITOR cyberpower@ups.server.tld 1 username password slave