Difference between revisions of "ESXi - 6.7 esxcli fcoe"

From Da Nerd Mage Wiki
Jump to navigation Jump to search
(Created page with "= fcoe =")
 
 
(9 intermediate revisions by the same user not shown)
Line 1: Line 1:
= fcoe =
VMware Fibre Channel over Ethernet (FCoE) commands.
 
== adapter ==
* '''list'''
: List FCOE-capable CNA devices.
:* <code>esxcli fcoe adapter list</code>
* '''remove'''
: Initiate FCOE adapter removal.
:* <code>esxcli fcoe adapter remove '''ADAPTER'''</code>
 
'''ADAPTER'''
  -a|--adapter-name=<str>  The FCOE adapter name (vmhbaX) (required)
 
== nic ==
* '''disable'''
: Disable rediscovery of FCOE storage on behalf of an FCOE-capable CNA upon next boot.
:* <code>esxcli fcoe nic disable '''NICNAME'''</code>
* '''discover'''
: Initiate FCOE adapter discovery on behalf of an FCOE-capable CNA.
:* <code>esxcli fcoe nic discover '''NICNAME'''</code>
* '''enable'''
: Enable an FCOE-capable NIC if it is disabled.
:* <code>esxcli fcoe nic enable '''NICNAME'''</code>
* '''list'''
: List FCOE-capable CNA devices.
:* <code>esxcli fcoe nic list</code>
* '''remove'''
: Initiate FCOE device destroy on behalf of an FCOE-capable PNIC.
:* <code>esxcli fcoe nic remove '''NICNAME'''</code>
* '''set'''
: Set options on FCOE-capable CNA.
:* <code>esxcli fcoe nic set '''OPTIONS'''</code>
'''NICNAME'''
  -n{{!}}--nic-name=<str>  The CNA adapter name (vmnicX) (required)
'''OPTIONS'''
  -V{{!}}--enable-vn2vn=<bool>  Enable or Disable VN2VN mode on the nic (Reboot Required)
  -n{{!}}--nic-name=<str>        The CNA adapter name (vmnicX) (required)
  -p{{!}}--priority=<long>      Priority class (0 - 7) to use for FCOE traffic
  -v{{!}}--vlan-id=<long>        The VLAN id for this nic, range '0 - 4095'(Reboot Required)

Latest revision as of 20:09, 10 February 2022

VMware Fibre Channel over Ethernet (FCoE) commands.

adapter

  • list
List FCOE-capable CNA devices.
  • esxcli fcoe adapter list
  • remove
Initiate FCOE adapter removal.
  • esxcli fcoe adapter remove ADAPTER
ADAPTER
 -a|--adapter-name=<str>   The FCOE adapter name (vmhbaX) (required)

nic

  • disable
Disable rediscovery of FCOE storage on behalf of an FCOE-capable CNA upon next boot.
  • esxcli fcoe nic disable NICNAME
  • discover
Initiate FCOE adapter discovery on behalf of an FCOE-capable CNA.
  • esxcli fcoe nic discover NICNAME
  • enable
Enable an FCOE-capable NIC if it is disabled.
  • esxcli fcoe nic enable NICNAME
  • list
List FCOE-capable CNA devices.
  • esxcli fcoe nic list
  • remove
Initiate FCOE device destroy on behalf of an FCOE-capable PNIC.
  • esxcli fcoe nic remove NICNAME
  • set
Set options on FCOE-capable CNA.
  • esxcli fcoe nic set OPTIONS
NICNAME
 -n|--nic-name=<str>   The CNA adapter name (vmnicX) (required)
OPTIONS
 -V|--enable-vn2vn=<bool>   Enable or Disable VN2VN mode on the nic (Reboot Required)
 -n|--nic-name=<str>        The CNA adapter name (vmnicX) (required)
 -p|--priority=<long>       Priority class (0 - 7) to use for FCOE traffic
 -v|--vlan-id=<long>        The VLAN id for this nic, range '0 - 4095'(Reboot Required)
Retrieved from ‘https://wiki.nerdmage.ca/index.php?title=ESXi_-_6.7_esxcli_fcoe&oldid=965’