Difference between revisions of "Setting up a NUT Client"
Jump to navigation
Jump to search
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
= Install NUT client= | |||
* <code>sudo apt install nut-client</code> | |||
== Select your mode == | == Select your mode == | ||
* <code>sudo vi /etc/nut/nut.conf</code> | * <code>sudo vi /etc/nut/nut.conf</code> | ||
| Line 7: | Line 11: | ||
(Running Debian 11...) | (Running Debian 11...) | ||
=== Select your REMOTE hardware === | === Select your REMOTE hardware === | ||
* <code>sudo vi /etc/nut/upsmon.conf</code> | * <code>sudo vi /etc/nut/upsmon.conf</code> | ||
MONITOR cyberpower@ups.server.tld 1 username password client | |||
(where '''ups.server.tld''' is the name or IP of your NUT server.) | |||
== == | == == | ||
Latest revision as of 22:22, 11 November 2023
Install NUT client
sudo apt install nut-client
Select your mode
sudo vi /etc/nut/nut.conf
(I'm installing NUT on VMs and accessing the NUT server in it's own VM on the same ESXi server...)
MODE=netclient
Case #1: Non-GUI systems
(Running Debian 11...)
Select your REMOTE hardware
sudo vi /etc/nut/upsmon.conf
MONITOR cyberpower@ups.server.tld 1 username password client
(where ups.server.tld is the name or IP of your NUT server.)