Difference between revisions of "ESXi - 6.7 esxcli fcoe"
Jump to navigation
Jump to search
(→nic) |
|||
| Line 17: | Line 17: | ||
* '''disable''' | * '''disable''' | ||
: Disable rediscovery of FCOE storage on behalf of an FCOE-capable CNA upon next boot. | : Disable rediscovery of FCOE storage on behalf of an FCOE-capable CNA upon next boot. | ||
:* <code>esxcli fcoe nic disable ''' | :* <code>esxcli fcoe nic disable '''NICNAME'''</code> | ||
* '''discover''' | * '''discover''' | ||
: Initiate FCOE adapter discovery on behalf of an FCOE-capable CNA. | : Initiate FCOE adapter discovery on behalf of an FCOE-capable CNA. | ||
:* <code>esxcli fcoe nic discover ''' | :* <code>esxcli fcoe nic discover '''NICNAME'''</code> | ||
* '''enable''' | * '''enable''' | ||
: Enable an FCOE-capable NIC if it is disabled. | : Enable an FCOE-capable NIC if it is disabled. | ||
:* <code>esxcli fcoe nic enable ''' | :* <code>esxcli fcoe nic enable '''NICNAME'''</code> | ||
* '''list''' | * '''list''' | ||
: List FCOE-capable CNA devices. | : List FCOE-capable CNA devices. | ||
| Line 29: | Line 29: | ||
* '''remove''' | * '''remove''' | ||
: Initiate FCOE device destroy on behalf of an FCOE-capable PNIC. | : Initiate FCOE device destroy on behalf of an FCOE-capable PNIC. | ||
:* <code>esxcli fcoe nic remove ''' | :* <code>esxcli fcoe nic remove '''NICNAME'''</code> | ||
* '''set''' | * '''set''' | ||
: Set options on FCOE-capable CNA. | : Set options on FCOE-capable CNA. | ||
:* <code>esxcli fcoe nic set ''' | :* <code>esxcli fcoe nic set '''CMD OPTIONS'''</code> | ||
'''NICNAME''' | |||
-n|--nic-name=<str> The CNA adapter name (vmnicX) (required) | |||
'''CMD OPTIONS''' | |||
-V|--enable-vn2vn=<bool> Enable or Disable VN2VN mode on the nic (Reboot Required) | |||
-n|--nic-name=<str> The CNA adapter name (vmnicX) (required) | |||
-p|--priority=<long> Priority class (0 - 7) to use for FCOE traffic | |||
-v|--vlan-id=<long> The VLAN id for this nic, range '0 - 4095'(Reboot Required) | |||
= Definitions = | = Definitions = | ||
Revision as of 02:08, 9 February 2022
fcoe
VMware Fibre Channel over Ethernet (FCoE) commands.
adapter
- list
- List FCOE-capable CNA devices.
esxcli fcoe adapter list
- remove
- Initiate FCOE adapter removal.
esxcli fcoe adapter remove ADAPTER
ADAPTER
-a|--adapter-name=<str>
The FCOE adapter name (vmhbaX) (required)
nic
- disable
- Disable rediscovery of FCOE storage on behalf of an FCOE-capable CNA upon next boot.
esxcli fcoe nic disable NICNAME
- discover
- Initiate FCOE adapter discovery on behalf of an FCOE-capable CNA.
esxcli fcoe nic discover NICNAME
- enable
- Enable an FCOE-capable NIC if it is disabled.
esxcli fcoe nic enable NICNAME
- list
- List FCOE-capable CNA devices.
esxcli fcoe nic list
- remove
- Initiate FCOE device destroy on behalf of an FCOE-capable PNIC.
esxcli fcoe nic remove NICNAME
- set
- Set options on FCOE-capable CNA.
esxcli fcoe nic set CMD OPTIONS
NICNAME -n|--nic-name=<str> The CNA adapter name (vmnicX) (required) CMD OPTIONS -V|--enable-vn2vn=<bool> Enable or Disable VN2VN mode on the nic (Reboot Required) -n|--nic-name=<str> The CNA adapter name (vmnicX) (required) -p|--priority=<long> Priority class (0 - 7) to use for FCOE traffic -v|--vlan-id=<long> The VLAN id for this nic, range '0 - 4095'(Reboot Required)
Definitions
ADAPTER
- The FCOE adapter name (vmhbaX) (required)
NICNAME
- The CNA adapter name (vmnicX) (required)
[cmd options]
- -V|--enable-vn2vn=<bool>
- Enable or Disable VN2VN mode on the nic (Reboot Required)
- -n|--nic-name=<str>
- The CNA adapter name (vmnicX) (required)
- -p|--priority=<long>
- Priority class (0 - 7) to use for FCOE traffic
- -v|--vlan-id=<long>
- The VLAN id for this nic, range '0 - 4095'(Reboot Required)