PVE Troubleshooting

For some reason, the denizens of the Internet assume that all difficulties when using PVE stem from screwing up your cluster.  This is kind of odd when you consider that, sometimes, PVE servers run on their own...

qm commands fail hard

Example:

root@proxmox-pve:~# qm list
ipcc_send_rec[1] failed: Connection refused
ipcc_send_rec[2] failed: Connection refused
ipcc_send_rec[3] failed: Connection refused
Unable to load access control list: Connection refused

Nearly every Google hit is discussion about how to get your cluster working again...  :|

The actual problem, OTOH... Appears to be that, if your hostname doesn't match what's in /etc/hosts qm gets lost...

Take a look at /etc/hostname

In our example, it'll look like:

proxmox-pve

Now, if /etc/hosts contains:

127.0.0.1 localhost.localdomain localhost
192.168.1.2 pve.tinkernet.ca pve

# The following lines are desirable for IPv6 capable hosts

::1     ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts

poor PVE is gonna be confused.

That second line should be:

192.168.1.2 proxmox-pve.tinkernet.ca proxmox-pve