ESXi - 6.7 storage - Revision history

Tinker: /* oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga */

2022-02-12T06:18:32Z

oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga

← Older revision		Revision as of 02:18, 12 February 2022
Line 572:		Line 572:
	-v\|--volume-name=<str>		-v\|--volume-name=<str>
	The NFS v4.1 volume name. (required)		The NFS v4.1 volume name. (required)
	~~= oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga =~~

	== nmp ==		== nmp ==

Tinker: /* satp */

2022-02-12T06:15:54Z

satp

← Older revision		Revision as of 02:15, 12 February 2022
Line 682:		Line 682:
	*'''set'''		*'''set'''
	:Set the default Path Selection Policy for a given Storage Array Type Plugin (SATP).		:Set the default Path Selection Policy for a given Storage Array Type Plugin (SATP).
	:* <code>esxcli storage nmp satp set</code>		:* <code>esxcli storage nmp satp set '''OPTIONS'''</code>
			'''OPTIONS'''
			-b\|--boot This is a system default rule added at boot time. Do not modify esx.conf or add to host profile.
			-P\|--default-psp=<str>
			The default path selection policy to set for a given --satp (required)
			-s\|--satp=<str> The SATP name for the Storage Array Type Plugin on which this command will operate. (required)

	==== generic ====		==== generic ====
Line 688:		Line 693:
	*'''get'''		*'''get'''
	:Allow retrieving of per device SATP configuration parameters.		:Allow retrieving of per device SATP configuration parameters.
	:* <code>esxcli storage nmp satp generic deviceconfig get</code>		:* <code>esxcli storage nmp satp generic deviceconfig get '''OPTIONS'''</code>
			'''OPTIONS'''
			-d\|--device=<str> The device you wish to get SATP configuration for. (required)
			-e\|--exclude-tpg-info Exclude TPG info from the device's SATP configuration.

	*'''set'''		*'''set'''
	:Allow setting of per device SATP configuration parameters. This command will set the configuration for the given device with whichever SATP it is currently configurated with.		:Allow setting of per device SATP configuration parameters. This command will set the configuration for the given device with whichever SATP it is currently configurated with.
	:* <code>esxcli storage nmp satp generic deviceconfig set '''OPTIONS'''</code>		:* <code>esxcli storage nmp satp generic deviceconfig set '''OPTIONS'''</code>
	'''OPTIONS'''		'''OPTIONS'''
	-E\|--~~default The Path selection policy is set back to the default for~~		-c\|--config=<str> The configuration string you wish to set. (required)
	~~the assigned SATP for this device.~~		-d\|--device=<str> The device you wish to set SATP configuration for.
	~~-d\|--device~~=<str> The ~~device~~ you wish to set ~~the Path Selection Policy for~~.
	(required)
	-P\|--~~psp~~=<str> The ~~Path selection policy~~ you wish to ~~assign to the given~~
	~~device.~~

	===== pathconfig =====		===== pathconfig =====
	*'''get'''		*'''get'''
	:Allow retrieving of per path SATP configuration parameters.		:Allow retrieving of per path SATP configuration parameters.
	:* <code>esxcli storage nmp satp generic pathconfig get</code>		:* <code>esxcli storage nmp satp generic pathconfig get '''OPTIONS'''</code>
			'''OPTIONS'''
			-p\|--path=<str> The path you wish to get SATP configuration for. (required)

	*'''set'''		*'''set'''
	:Allow setting of per path SATP configuration parameters. This command will set the configuration for the given path with whichever SATP it is currently configurated with.		:Allow setting of per path SATP configuration parameters. This command will set the configuration for the given path with whichever SATP it is currently configurated with.
	:* <code>esxcli storage nmp satp generic pathconfig set</code>		:* <code>esxcli storage nmp satp generic pathconfig set '''OPTIONS'''</code>
			'''OPTIONS'''
			-c\|--config=<str> The configuration string you wish to set. (required)
			-p\|--path=<str> The path you wish to set SATP configuration for. (required)

	==== rule ====		==== rule ====
	*'''list'''		*'''list'''
Line 713:		Line 726:
	*'''add'''		*'''add'''
	:Add a rule to the list of claim rules for the given SATP.		:Add a rule to the list of claim rules for the given SATP.
	:* <code>esxcli storage nmp satp rule add</code>		:* <code>esxcli storage nmp satp rule add '''OPTIONS'''</code>
			'''OPTIONS'''
			-b\|--boot This is a system default rule added at boot time. Do not modify esx.conf or add to host profile.
			-c\|--claim-option=<str>
			Set the claim option string when adding a SATP claim rule.
			-e\|--description=<str>
			Set the claim rule description when adding a SATP claim rule.
			-d\|--device=<str> Set the device when adding SATP claim rules. Device rules are mutually exclusive with vendor/model and driver rules.
			-D\|--driver=<str> Set the driver string when adding a SATP claim rule. Driver rules are mutually exclusive with vendor/model rules.
			-f\|--force Force claim rules to ignore validity checks and install the rule anyway.
			-M\|--model=<str> Set the model string when adding SATP a claim rule. Vendor/Model rules are mutually exclusive with driver rules.
			-o\|--option=<str> Set the option string when adding a SATP claim rule.
			-P\|--psp=<str> Set the default PSP for the SATP claim rule.
			-O\|--psp-option=<str> Set the PSP options for the SATP claim rule.
			-s\|--satp=<str> The SATP for which a new rule will be added. (required)
			-R\|--transport=<str> Set the claim transport type string when adding a SATP claim rule.
			-t\|--type=<str> Set the claim type when adding a SATP claim rule.
			-V\|--vendor=<str> Set the vendor string when adding SATP claim rules. Vendor/Model rules are mutually exclusive with driver rules.

	*'''remove'''		*'''remove'''
	:Delete a rule from the list of claim rules for the given SATP.		:Delete a rule from the list of claim rules for the given SATP.
	:* <code>esxcli storage nmp satp rule remove</code>		:* <code>esxcli storage nmp satp rule remove '''OPTIONS'''</code>
			'''OPTIONS'''
			-b\|--boot This is a system default rule added at boot time. Do not modify esx.conf or add to host profile.
			-c\|--claim-option=<str>
			The claim option string for the SATP claim rule to delete.
			-e\|--description=<str>
			The desription string for the SATP claim rule to delete.
			-d\|--device=<str> The device for the SATP claim rule to delete
			-D\|--driver=<str> The driver string for the SATP claim rule to delete.
			-f\|--force Ignore validity checks and remove the rule anyway.
			-M\|--model=<str> The model string for the SATP claim rule to delete.
			-o\|--option=<str> The option string for the SATP claim rule to delete.
			-P\|--psp=<str> The default PSP for the SATP claim rule to delete.
			-O\|--psp-option=<str> The PSP options for the SATP claim rule to delete.
			-s\|--satp=<str> The SATP for which a rule will be deleted. (required)
			-R\|--transport=<str> The transport type for the SATP claim rule to delete.
			-t\|--type=<str> Set the claim type when adding a SATP claim rule.
			-V\|--vendor=<str> The vendor string for the SATP claim rule to delete

	= oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga =		= oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga =

Tinker: /* psp */

2022-02-12T06:04:07Z

psp

← Older revision		Revision as of 02:04, 12 February 2022
Line 605:		Line 605:
	*'''get'''		*'''get'''
	:Allow retrieving of Fixed Path Selection Policy settings for a given device.		:Allow retrieving of Fixed Path Selection Policy settings for a given device.
	:* <code>esxcli storage nmp psp fixed deviceconfig get</code>		:* <code>esxcli storage nmp psp fixed deviceconfig get '''OPTIONS'''</code>
			'''OPTIONS'''
			-d\|--device=<str> The device you wish to get the Preferred path for. (required)

	*'''set'''		*'''set'''
	:Allow setting of the perferred path on a given device controlled by the Fixed Path Selection Policy.		:Allow setting of the perferred path on a given device controlled by the Fixed Path Selection Policy.
	:* <code>esxcli storage nmp psp fixed deviceconfig set</code>		:* <code>esxcli storage nmp psp fixed deviceconfig set '''OPTIONS'''</code>
			'''OPTIONS'''
			-g\|--cfgfile Update the config file and runtime with the new setting. In case device is claimed by another PSP, ignore any errors when applying to runtime configuration.
			-E\|--default Clear the preferred path selection for the given device.
			-d\|--device=<str> The device you wish to set the preferred path for. This device must be controlled by the Fixed Path Selection Policy(except when -g is specified) (required)
			-p\|--path=<str> The path you wish to set as the preferred path for the given device.

	==== generic ====		==== generic ====
	===== deviceconfig =====		===== deviceconfig =====
	*'''get'''		*'''get'''
	:Allow retrieving of per device PSP configuration parameters.		:Allow retrieving of per device PSP configuration parameters.
	:* <code>esxcli storage nmp psp generic deviceconfig get</code>		:* <code>esxcli storage nmp psp generic deviceconfig get '''OPTIONS'''</code>
			'''OPTIONS'''
			-d\|--device=<str> The device you wish to get PSP configuration for. (required)

	*'''set'''		*'''set'''
	:Allow setting of per device PSP configuration parameters. This command will set the configuration for the given device with whichever PSP it is currently configurated with.		:Allow setting of per device PSP configuration parameters. This command will set the configuration for the given device with whichever PSP it is currently configurated with.
	:* <code>esxcli storage nmp psp generic deviceconfig set</code>		:* <code>esxcli storage nmp psp generic deviceconfig set '''OPTIONS'''</code>
			'''OPTIONS'''
			-g\|--cfgfile Update the config file and runtime with the new setting. In case device is claimed by another PSP, ignore any errors when applying to runtime configuration.
			-c\|--config=<str> The configuration string you wish to set. (required)
			-d\|--device=<str> The device you wish to set PSP configuration for. (required)

	===== pathconfig =====		===== pathconfig =====
	*'''get'''		*'''get'''
	:Allow retrieving of per path PSP configuration parameters.		:Allow retrieving of per path PSP configuration parameters.
	:* <code>esxcli storage nmp psp generic pathconfig get</code>		:* <code>esxcli storage nmp psp generic pathconfig get '''OPTIONS'''</code>
			'''OPTIONS'''
			-p\|--path=<str> The path you wish to get PSP configuration for. (required)

	*'''set'''		*'''set'''
	:Allow setting of per path PSP configuration parameters. This command will set the configuration for the given path with whichever PSP it is currently configurated with.		:Allow setting of per path PSP configuration parameters. This command will set the configuration for the given path with whichever PSP it is currently configurated with.
	:* <code>esxcli storage nmp psp generic pathconfig set</code>		:* <code>esxcli storage nmp psp generic pathconfig set '''OPTIONS'''</code>
			'''OPTIONS'''
			-g\|--cfgfile Update the config file and runtime with the new setting. In case device is claimed by another PSP, ignore any errors when applying to runtime configuration.
			-c\|--config=<str> The configuration string you wish to set. (required)
			-p\|--path=<str> The path you wish to set PSP configuration for. (required)

	==== roundrobin ====		==== roundrobin ====
	===== deviceconfig =====		===== deviceconfig =====
	*'''get'''		*'''get'''
	:Allow retrieving of Round Robin Path Selection Policy settings for a given device.		:Allow retrieving of Round Robin Path Selection Policy settings for a given device.
	:* <code>esxcli storage nmp psp roundrobin deviceconfig get</code>		:* <code>esxcli storage nmp psp roundrobin deviceconfig get '''OPTIONS'''</code>
			'''OPTIONS'''
			-d\|--device=<str> The device you wish to get the Round Robin properties for. (required)

	*'''set'''		*'''set'''
	:Allow setting of the Round Robin path options on a given device controlled by the Round Robin Selection Policy.		:Allow setting of the Round Robin path options on a given device controlled by the Round Robin Selection Policy.
	:* <code>esxcli storage nmp psp roundrobin deviceconfig set</code>		:* <code>esxcli storage nmp psp roundrobin deviceconfig set '''OPTIONS'''</code>
			'''OPTIONS'''
			-B\|--bytes=<long> When the --type option is set to 'bytes' this is the value that will be assigned to the byte limit value for this device.
			-g\|--cfgfile Update the config file and runtime with the new setting. In case device is claimed by another PSP, ignore any errors when applying to runtime configuration.
			-d\|--device=<str> The device you wish to set the Round Robin settings for. This device must be controlled by the Round Robin Path Selection Policy(except when -g is specified) (required)
			-I\|--iops=<long> When the --type option is set to 'iops' this is the value that will be assigned to the I/O operation limit value for this device.
			-T\|--latency-eval-time=<long>
			When the --type option is set to 'latency' this value can control at what interval (in ms) the latency of paths should be evaluated.
			-S\|--num-sampling-cycles=<long>
			When the --type option is set to 'latency' this value will control how many sample IOs should be issued on each path to calculate latency of the path.
			-t\|--type=<str> Set the type of the Round Robin path switching that should be enabled for this device. Valid values for type are:
			bytes: Set the trigger for path switching based on the number of bytes sent down a path.
			default: Set the trigger for path switching back to default values.
			iops: Set the trigger for path switching based on the number of I/O operations on a path.
			latency: Set the trigger for path switching based on latency and pending IOs on path.
			-U\|--useano=<bool> Set useano to true,to also include non-optimizedpaths in the set of active paths used to issue I/Os on this device,otherwise set it to false

	=== satp ===		=== satp ===

Tinker: /* san */

2022-02-12T05:51:37Z

san

← Older revision		Revision as of 01:51, 12 February 2022
Line 675:		Line 675:
	:* <code>esxcli storage nmp satp rule remove</code>		:* <code>esxcli storage nmp satp rule remove</code>

			= oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga =
	== san ==		== san ==
	=== fc ===		=== fc ===
Line 711:		Line 712:
	*'''get'''		*'''get'''
	:List Stats for given device, or all devices.		:List Stats for given device, or all devices.

	= oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga =		= oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga =

Tinker: /* oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga */

2022-02-12T05:51:05Z

oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga

← Older revision		Revision as of 01:51, 12 February 2022
Line 412:		Line 412:
	Select the module name to be unregistered (required)		Select the module name to be unregistered (required)

	~~= oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga =~~
	== filesystem ==		== filesystem ==
	*'''list'''		*'''list'''
Line 573:		Line 572:
	-v\|--volume-name=<str>		-v\|--volume-name=<str>
	The NFS v4.1 volume name. (required)		The NFS v4.1 volume name. (required)
			= oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga =

	== nmp ==		== nmp ==
Line 711:		Line 711:
	*'''get'''		*'''get'''
	:List Stats for given device, or all devices.		:List Stats for given device, or all devices.
			= oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga =

	== vflash ==		== vflash ==
Line 734:		Line 735:
	*'''get'''		*'''get'''
	:Get vflash module statistics		:Get vflash module statistics
			= oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga =

	== vmfs ==		== vmfs ==
Line 772:		Line 774:
	*'''list'''		*'''list'''
	:List extents of unresolved snapshots/replicas of VMFS volume.		:List extents of unresolved snapshots/replicas of VMFS volume.
			= oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga oogabooga =

	== vvol ==		== vvol ==

Tinker: /* device */

2022-02-12T05:49:04Z

device

← Older revision		Revision as of 01:49, 12 February 2022
Line 582:		Line 582:
	*'''set'''		*'''set'''
	:Allow setting of the Path Selection Policy (PSP) for the given device to one of the loaded policies on the system.		:Allow setting of the Path Selection Policy (PSP) for the given device to one of the loaded policies on the system.
	:* <code>esxcli storage nmp device set</code>		:* <code>esxcli storage nmp device set '''OPTIONS'''</code>
			'''OPTIONS'''
			-E\|--default The Path selection policy is set back to the default for
			the assigned SATP for this device.
			-d\|--device=<str> The device you wish to set the Path Selection Policy for.
			(required)
			-P\|--psp=<str> The Path selection policy you wish to assign to the given
			device.

	=== path ===		=== path ===

Tinker: /* nmp */

2022-02-12T05:47:52Z

nmp

← Older revision		Revision as of 01:47, 12 February 2022
Line 579:		Line 579:
	*'''list'''		*'''list'''
	:List the devices currently controlled by the VMware NMP Multipath Plugin and show the SATP and PSP information associated with that device.		:List the devices currently controlled by the VMware NMP Multipath Plugin and show the SATP and PSP information associated with that device.
			:* <code>esxcli storage nmp device list</code>
	*'''set'''		*'''set'''
	:Allow setting of the Path Selection Policy (PSP) for the given device to one of the loaded policies on the system.		:Allow setting of the Path Selection Policy (PSP) for the given device to one of the loaded policies on the system.
			:* <code>esxcli storage nmp device set</code>

	=== path ===		=== path ===
	*'''list'''		*'''list'''
	:List the paths currently claimed by the VMware NMP Multipath Plugin and show the SATP and PSP information associated with that path.		:List the paths currently claimed by the VMware NMP Multipath Plugin and show the SATP and PSP information associated with that path.
			:* <code>esxcli storage nmp path list</code>

	=== psp ===		=== psp ===
	*'''list'''		*'''list'''
	:List the Path Selection Plugins (PSP) that are currently loaded into the NMP system and display information about those PSPs		:List the Path Selection Plugins (PSP) that are currently loaded into the NMP system and display information about those PSPs
			:* <code>esxcli storage nmp psp list</code>

	==== fixed ====		==== fixed ====
Line 594:		Line 598:
	*'''get'''		*'''get'''
	:Allow retrieving of Fixed Path Selection Policy settings for a given device.		:Allow retrieving of Fixed Path Selection Policy settings for a given device.
			:* <code>esxcli storage nmp psp fixed deviceconfig get</code>
	*'''set'''		*'''set'''
	:Allow setting of the perferred path on a given device controlled by the Fixed Path Selection Policy.		:Allow setting of the perferred path on a given device controlled by the Fixed Path Selection Policy.
			:* <code>esxcli storage nmp psp fixed deviceconfig set</code>
	==== generic ====		==== generic ====
	===== deviceconfig =====		===== deviceconfig =====
	*'''get'''		*'''get'''
	:Allow retrieving of per device PSP configuration parameters.		:Allow retrieving of per device PSP configuration parameters.
			:* <code>esxcli storage nmp psp generic deviceconfig get</code>
	*'''set'''		*'''set'''
	:Allow setting of per device PSP configuration parameters. This command will set the configuration for the given device with whichever PSP it is currently configurated with.		:Allow setting of per device PSP configuration parameters. This command will set the configuration for the given device with whichever PSP it is currently configurated with.
			:* <code>esxcli storage nmp psp generic deviceconfig set</code>
	===== pathconfig =====		===== pathconfig =====
	*'''get'''		*'''get'''
	:Allow retrieving of per path PSP configuration parameters.		:Allow retrieving of per path PSP configuration parameters.
			:* <code>esxcli storage nmp psp generic pathconfig get</code>
	*'''set'''		*'''set'''
	:Allow setting of per path PSP configuration parameters. This command will set the configuration for the given path with whichever PSP it is currently configurated with.		:Allow setting of per path PSP configuration parameters. This command will set the configuration for the given path with whichever PSP it is currently configurated with.
			:* <code>esxcli storage nmp psp generic pathconfig set</code>
	==== roundrobin ====		==== roundrobin ====
	===== deviceconfig =====		===== deviceconfig =====
	*'''get'''		*'''get'''
	:Allow retrieving of Round Robin Path Selection Policy settings for a given device.		:Allow retrieving of Round Robin Path Selection Policy settings for a given device.
			:* <code>esxcli storage nmp psp roundrobin deviceconfig get</code>
	*'''set'''		*'''set'''
	:Allow setting of the Round Robin path options on a given device controlled by the Round Robin Selection Policy.		:Allow setting of the Round Robin path options on a given device controlled by the Round Robin Selection Policy.
			:* <code>esxcli storage nmp psp roundrobin deviceconfig set</code>

	=== satp ===		=== satp ===
	*'''list'''		*'''list'''
	:List the Storage Array Type Plugins (SATP) that are currently loaded into the NMP system and display information about those SATPs		:List the Storage Array Type Plugins (SATP) that are currently loaded into the NMP system and display information about those SATPs
			:* <code>esxcli storage nmp satp list</code>
	*'''set'''		*'''set'''
	:Set the default Path Selection Policy for a given Storage Array Type Plugin (SATP).		:Set the default Path Selection Policy for a given Storage Array Type Plugin (SATP).
			:* <code>esxcli storage nmp satp set</code>

	==== generic ====		==== generic ====
Line 624:		Line 638:
	*'''get'''		*'''get'''
	:Allow retrieving of per device SATP configuration parameters.		:Allow retrieving of per device SATP configuration parameters.
			:* <code>esxcli storage nmp satp generic deviceconfig get</code>
	*'''set'''		*'''set'''
	:Allow setting of per device SATP configuration parameters. This command will set the configuration for the given device with whichever SATP it is currently configurated with.		:Allow setting of per device SATP configuration parameters. This command will set the configuration for the given device with whichever SATP it is currently configurated with.
			:* <code>esxcli storage nmp satp generic deviceconfig set '''OPTIONS'''</code>
			'''OPTIONS'''
			-E\|--default The Path selection policy is set back to the default for
			the assigned SATP for this device.
			-d\|--device=<str> The device you wish to set the Path Selection Policy for.
			(required)
			-P\|--psp=<str> The Path selection policy you wish to assign to the given
			device.

	===== pathconfig =====		===== pathconfig =====
	*'''get'''		*'''get'''
	:Allow retrieving of per path SATP configuration parameters.		:Allow retrieving of per path SATP configuration parameters.
			:* <code>esxcli storage nmp satp generic pathconfig get</code>
	*'''set'''		*'''set'''
	:Allow setting of per path SATP configuration parameters. This command will set the configuration for the given path with whichever SATP it is currently configurated with.		:Allow setting of per path SATP configuration parameters. This command will set the configuration for the given path with whichever SATP it is currently configurated with.
			:* <code>esxcli storage nmp satp generic pathconfig set</code>
	==== rule ====		==== rule ====
	*'''list'''		*'''list'''
	:List the claiming rules for Storage Array Type Plugins (SATP)		:List the claiming rules for Storage Array Type Plugins (SATP)
			:* <code>esxcli storage nmp satp rule list</code>
	*'''add'''		*'''add'''
	:Add a rule to the list of claim rules for the given SATP.		:Add a rule to the list of claim rules for the given SATP.
			:* <code>esxcli storage nmp satp rule add</code>
	*'''remove'''		*'''remove'''
	:Delete a rule from the list of claim rules for the given SATP.		:Delete a rule from the list of claim rules for the given SATP.
			:* <code>esxcli storage nmp satp rule remove</code>

	== san ==		== san ==

Tinker: /* nfs41 */

2022-02-12T05:13:01Z

nfs41

@@ Line 529: / Line 529: @@
 *'''list'''
 :List the NFS v4.1 volumes currently known to the ESX host.
 *'''add'''
 :Add a new NFS v4.1 volume to the ESX Host and mount it with the given volume name.
 *'''remove'''
 :Remove an existing NFS v4.1 volume from the ESX host.
 === param ===
 *'''get'''
 :Get the volume parameters of the NFS v4.1 volumes.
 *'''set'''
 :Set the volume parameters of the NFS v4.1 volumes.
 == nmp ==

Tinker: /* nfs */

2022-02-12T05:06:23Z

nfs

@@ Line 485: / Line 485: @@
 *'''list'''
 :List the NAS volumes currently known to the ESX host.
 *'''add'''
 :Add a new NAS volume to the ESX Host and mount it with the given volume name.
 *'''remove'''
 :Remove an existing NAS volume from the ESX host.
 === param ===
 *'''get'''
 :Get the volume parameters of the NAS volumes.
 *'''set'''
 :Set the volume parameters of the NAS volumes.
 == nfs41 ==

Tinker: /* iofilter */

2022-02-12T04:57:11Z

iofilter

← Older revision		Revision as of 00:57, 12 February 2022
Line 475:		Line 475:
	*'''list'''		*'''list'''
	:List the iofilters installed on this host.		:List the iofilters installed on this host.
			:* <code>esxcli storage iofilter list</code>
	*'''enable'''		*'''enable'''
	:Enable an iofilter.		:Enable an iofilter.
			:* <code>esxcli storage iofilter enable '''OPTIONS'''</code>
			'''OPTIONS'''
			-f\|--filter=<str> Name of the iofilter. (required)

	== nfs ==		== nfs ==